Aerospace Structures: GATE AE Comprehensive Syllabus & Solved PYQs

Strength of Materials & Elasticity

Thin-Walled Structures

Structural Dynamics & Aeroelasticity

Aerospace Materials & Fatigue

The Fourier series representation of a square wave is shown in the figure below. The fluctuations seen near x = ±1 are named after which one of the following scientists?

A cantilever beam with an unsymmetric cross-section is subjected to a transverse shear force (P) at its free end. P acts at the shear center of the beam cross-section. Which one of the following statements is TRUE about the deformation of this beam?

The response x(t) of a freely vibrating single degree of freedom underdamped system is given below. In the equation, A and $\phi$ are constants. The damping ratio of the system is ________ (rounded off to 3 decimal places). x(t) = Ae-5t sin(10t + $\phi$)

Consider a unit square body as shown in the figure below. The body is subjected to the deformation field u = -ay and v = ax, where 'a' is a constant. Due to the application of this deformation field, the body undergoes _______ in the x-y plane.

The deformation of an open-section bar subjected to pure torsion can be solved by choosing an appropriate Prandtl stress function. Which of the following statements is/are true about the Prandtl stress function?

WA and WB are the respective maximum take-off weights of an aircraft for two ambient air conditions given below. Condition A: p = 1 bar, T = 50 oC; Condition B: p = 0.66 bar, T = -30 oC If all other parameters relevant for take-off are kept the same in these two conditions, the ratio WB/WA is ________ (rounded off to 3 decimal places).

A thin-walled circular tube is made of a material whose magnitude of the ultimate strength, both in tension and compression, is 200 MPa. The mean radius of the tube is 0.2 m and the wall thickness is 0.004 m. Based on the maximum stress criteria, the maximum torque that the tube can sustain is ________ kN-m (round off to the nearest integer).

A system comprising a bar, spring and mass is shown in the figure below. The bar, having negligible mass, is made of a material having Young's modulus E = 200 GPa, cross-sectional area A = 100 mm2, and length L = 100 mm. The spring stiffness k = 200 kN/mm and the mass M = 100 kg. The natural frequency of free vibration of the system is ________ rad/s (rounded off to the nearest integer).